Replace your wine bottle’s cork or screw cap with a Pivot™ Stopper, and pour a glass at a time with the Pivot™ Wine Preservation System, preserving the remaining wine for up to 4 weeks. Made using specially designed sealing plastic, each Stopper can be used again and again. Six Pivot™ Stoppers included, compatible with most regular shaped bottles. Only compatible with the Coravin Pivot™ Wine Preservation System.
Replace the cork or screw cap of your wine bottle with a Pivot™ Stopper.
How to Use Pivot
Open Bottle and Insert Stopper
Open the bottle of wine. Replace the cork or screwcap with a Pivot Stopper with the cap open (ensure the Stopper and bottle neck are both dry).
To pour, insert the Pivot Device through the Stopper. Tilt the bottle so the spout is over the wine glass, then press and hold the button on the Device. Release the button and bring the bottle upright to stop the pour.
How to Use Pivot™
Each Capsule will allow you to pour up to 20 five-ounce (150ml) glasses of wine with Pivot™ Systems.
Preserve Any Still Wine
Pivot™ can be used on virtually any still wine. The cork, screw cap, glass stopper, or any other closure can be easily replaced by the Pivot Stopper.
When you finish a bottle closed with a Pivot Stopper, you can remove and reuse that Stopper again and again. Purchase more Stoppers to preserve and enjoy even more wines.
Size & Weight
- 1.97 in / 50 mm
- 1.39 in / 35.3 mm
- 1.39 in / 35.3 mm
- 0.03 lbs / 14 g
- Pivot™ Stoppers
- injection molded plastic
Can the Pivot Stopper be reused?
Once you finish the bottle, remove the Stopper. Clean the Stopper by rinsing it in a steady stream of warm water for several seconds. Shake excess water from the Stopper cap. Dry with a soft cloth. Ensure the Silicone Rings on the Stopper are completely dry before inserting into a new bottle
The Stopper will last for up to 1 year.
How many uses should I get from the Pivot Stopper?
There is no maximum amount of uses. You should easily get years of service from your Pivot Stopper. However, like all Silicone Seals, eventually it may wear out and not seal as well. Then it is time to replace your stopper.
Why does the Stopper need to be dry before using?
The Stopper needs to be dry before using to ensure a tight seal inside the neck of the bottle. Ensure the Silicone Rings and the inside of the bottle are completely dry before inserting.